Lumel DZ2, Руководство пользователя

Страница: 9 / 16

Table 1
Fig. . Description of sockets to connect the supplying network and interface
Wires:
maximal wire cross-section: 1.5 mm
2
maximal cable diameter: 4.5... 7 mm
A shielded double spiral wire is recommended to connect the interface
Connect the shield with the PE terminal of the G2 interface socket.
6. REGISTER MAP OF THE CLOCK CONTROLLER
The MODBUS RTU communication protocol has been implemented in the controller.
Applied markings:
R – readout
W – writing
DZ configuration registers – registers 4000...4037
All configuration registers are 16-bit registers of unsigned integer type.
Register
address
operations Range Description
4000 RW 1...247 DZx clock type address in MODBUS network
4001 RW 0...3
Operating mode of the interface no 1:
0: RTU 8N1
1: RTU 8N2
2: RTU 8E1
3: RTU 8O1
4002 RW 0...9
Baud rate of interface no 1 (b/s):
0 –2400; 1 – 4800; 2 – 9600; 3 – 14400; 4 –19200;
5–28800; 6–38400; 7– 57600; 8 – 76800 ; 9 –115200
4007 RW 1...100 Luminosity level for the day
4008 RW 1...100 Luminosity level for the night