RHD1100 04
GENERAL POWER TOOL SAFETY WARNINGS
Double insulation:
The tool is double insulated. This means that all
the external metal parts are electrically insulated
from the mains power supply. This is done by
placing insulation barriers between the electrical
and mechanical components making it
unnecessary for the tool to be earthed.
Important note:
Be sure the supply is the same as the voltage
given on the rating plate. The tool is fitted with a
two-core cable and plug.
Remove the mains plug from socket before
carrying out any adjustment or servicing.
Torque limiter:
There is a clutch in your hammer drill. The
torque limiter will actuate when a certain torque
level is reached. The motor will disengage from
the output shaft. When this happens, the bit will
stop turning. As soon as the torque limiter
actuates, release the trigger and remove the tool
and bit immediately. This will help prevent
premature wear of the tool.
7. Safety Warnings for Drill
a)When using electric hammer chisel only use bits
that are configured with the correct slots for this
chuck.
b) BEFORE STARTING
the operation, jog the chisel
switch to make sure the chisel bit does not wobble
or vibrate.
c) MAKE SURE
the spindle has come to a complete
stop before touching the chuck or attempting to
change the chisel bit also beware that the bit will
be hot, let it cool down before changing as it could
burn and cause injury.
e)ALWAYS MAKE SURE THE CHISEL IS FIRMLY
SEATED IN THE HEX CHUCK before starting the
job in hand.
8. Safety Warnings for Vibration safety
This tool vibrates during use. Repeated or long-
term exposure to vibration may cause temporary
or permanent physical injury, particularly to the
hands, arms and shoulders. To reduce the risk of
vibration-related injury:
•
Absorbs reaction force of drill bit at the
moment of impact
•
Improved operation with extremely low
vibration
•
Reduced strain over prolonged periods of
use
•
Working with a safer machine improves
user confidence
