Lumberjack PR5KIT, Инструкция по безопасности и эксплуатации, Страница: 4 / 9

• When leaving Handy Paint Roller unattended for a longer period of time, wrap roller in a plastic bag to prevent drying, removing as much air as
possible from bag.
• Make sure the type of paint you use can be cleaned with either mineral spirits (for oil-based paints) or a warm water and soap solution (for
water soluble paints like latex).
• Use drop cloths to protect your floors and anything else in the room that you do not want accidentally splattered with paint.
• When using kickstand, always release pressure by pulling plunger out slightly.
Preparing the Handy Paint Roller to paint
1.) Lubricate part (b) using petroleum jelly provided.
Attach assembled roller (d) onto the roller frame (c).
Screw the part (a) onto the inner end of the roller
assembly.
2.) Push roller frame (e) over end of part (d). Thread
roller frame collar (f) snugly onto threads of part (d).
Push part (d) over end of handle assembly (b), ensuring
O-ring (c) is seated inside part (d). Thread handle
assembly collar (a) snugly onto threads of part (d).
3.) The spatter shield helps reduce spatter when
painting, especially on ceilings. Position the spatter
shield by rotating around roller frame.
NOTE: Spatter shield is also helpful to prevent dripping
when the Handy Paint Roller is resting on kickstand
and is not in use. Just position spatter shield under
roller.
Filling the Handy Paint Roller with paint
1.) Snap fill tube (a) into the clamps of paint can
clip (b).
A
B
C
D