Lumberjack EP82-3, Инструкция по безопасности и эксплуатации

Страница: 12 / 18

EP82-3 10
Replacing the Carbon Brushes
- Unscrew and remove the side cover
using the three securing screws.
- VERY carefully prise out the carbon
brush holders. DO NOT USE FORCE.
This can be a little tricky, but once
the holder is part way out, use a
small screwdriver to prise the holder
away from the brush end.
- Disassemble the holder, taking care
to retain the plastic end cap.
- Replace the carbon brush slide the
spade connection on to the end of
the brush and hold in place with the
plastic end cap.
- Replace the holder carefully back
into place, again DO NOT USE FORCE
to avoid damaging the brush.