Lumberjack EBS100, Руководство пользователя

Страница: 10 / 20

8
Assembly
Avoid unintentional starting of the machine.
During assembly and for all work on the
machine, the power plug must not be
connected to the mains supply.
Carefully remove all parts included in the
delivery from their packaging.
Remove all packaging material from the
machine and the accessories provided.
Before starting the operation of the machine
for the first time, check if all parts listed in
the box content section have been supplied
Note: Check the power tool for possible
damage. Before further use of the machine,
check that all protective devices are fully
functional. Any lightly damaged parts must
be carefully checked to ensure flawless
operation of the tool. All parts must be
properly mounted and all conditions fulfilled
that ensure faultless operation.
Damaged protective devices and parts must
be immediately replaced by an authorised
service centre.
Dust Bag
We recommend that dust extraction is used
at all times when using this product.
To fit the dust bag (supplied) push it onto the
extraction port as shown below.
Centralizing the Belt
Always make sure that the belt is running
centrally before the machine is used.
Centralizing the belt is essential to stop it
from running off the rollers during use.
‐ With the belt facing the operator and the
machine on its side, pull the trigger and
observe how the belt is running. If this belt
runs toward either edge it will need
adjusting.
‐ Turn the centralizing knob to adjust the belt
to the centre of the rollers.