BS305/BS340 24
Accessory for Circular Cutting(Option)
Introduction
Your band saw may be provided with accessory
for circular cutting in the carton. To use the
accessory, read and understand the following
instructions.
Installed Circular device
If your Band saw has been installed circle device,
please ignore this step.
Remove old Connecting Block(NO.100)
1. Loosen the screw.
2. Pull the guide block .
3. Loosen the socket head screw.
4. Loosen the screw, and remove connecting block
5. Install the Circular cutting and tighten the screw.
6. Tighten the socket head screw.
7. Push the guide block the hole and tighten the screw.
