HOW TO SUCTION LOAD YOUR GREASE GUN :
1.
Unscrew the Head Assembly from the barrel of the Grease.
Gun (See Fig. 1). Pack head with Grease (See Fig. 2).
2.
Insert the open end of the barrel below the surface of the
Grease (See Fig. 3). Slowly pull the Follower-rod while
pushing the barrel deeper into the Grease to prevent air
pockets from being pulled into the barrel.
3.
When the Follower-rod is fully extended, pull it sideways
to latch the rod groove into the keyhole slot in the end-cap
to lock the Follower-rod in place. Screw the Head Assembly
loosely onto the barrel.
4.
Unlock the Follower-rod from the end-cap. This would push
it into the barrel. Tighten Head Assembly securely (See Fig. 5).
5.
Pump the Lever handle several times until Grease flows from
the Coupler.
HOW TO LOAD YOUR GREASE GUN WITH CARTRIDGE :
1.
Unscrew the Head Assembly from the barrel of the Grease
Gun Pull back the Follower-rod. When the Follower-rod is
fully extended, pull it sideways to latch the rod groove into the
keyhole slot in the end-cap to lock the Follower-rod in place
(See Fig. 1).
2.
Pack head with Grease (See Fig. 2).
3.
Remove the plastic cap from the end of Grease Cartridge
and, insert open end first, into the barrel of Grease Gun
(See Fig. 4). Push the Grease Cartridge into the barrel until
the rim of the Cartridge end contacts the rim of the barrel.
Screw the head back onto the barrel. Screw the Head
Assembly loosely onto the barrel.
4.
Unlock the Follower-rod from the end-cap. This would push
it into the barrel. Tighten the Head Assembly securely (See
Fig. 5).
