INSTALLATION INSTRUCTIONS
FACADE OUTLINER
Vestalux
V2
LS9016
ASIA PACIFIC
18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
P:
+61 7 3854 5000 |
F:
+61 7 3854 5001 |
E:
lumascape.com.au
NORTH AMERICA
1940 Diamond Street, San Marcos, CA 92078, USA
P:
+1 650 595 5862 |
F:
+1 650 595 5820 |
E:
lumascape.com
5 /8
IN0184-200717
Products and specifications are subject to change without notice.
Attaching Fixed Bracket
Attaching Cable Holder
Step 1
Screw fixed bracketry to mounting board on underside of luminaire and screw bracket in place. Repeat until all four
screws are firmly in place.
Torque:
1.5 N.m.
Step 1
Clip the cable under the cable holder. Pinch firmly to remove and re-attach cable holders. Repeat these steps for each
cable holder on each luminaire. NOTE: This is not applicable for 1 ft luminaires.
