ASIA PACIFIC
18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
P:
+61 7 3854 5000 |
F:
+61 7 3854 5001 |
E:
www.lumacape.com.au
NORTH AMERICA
1940 Diamond Street, San Marcos, CA 94070, USA
P:
+1 650 595 5862 |
F:
+1 650 595 5820 |
E:
www.lumacape.com
9 / 17
IN0172 N191118
Products and specifications are subject to change without notice.
PowerSync™
PS
Data Injector
Installation Instructions
LUMASCAPE
www.lumascape.com
Power
PowerSync
Mode
USB
Status
Check
Use with Lumascape wireless DMX
DMX in
DMX out
GND
GND
Com
10
V out
Ch 1 in
Ch 2 in
0 1 2
3
4
5
67
89
10
12
11
14
13
15
DMX Trac
techsupport.lumascape.com
Wiring for 0-10 V Sourcing Dimmers (North America)
Mode Switch Set to Mode 5.
Power In
Colour
Label Designation
White
N
Neutral
Green / Yellow
Earth
Black
L
Live (120-277 V)
PowerSync™ Out to Luminaires
Colour
Label Designation
White
N
Neutral
Green / Yellow
Earth
Black
L
Live (120-277 V)
Grey*
Data PowerSync™ Data
* Connecting high voltage to data terminal will cause
permanent damage and void warranty.
0-10 V In from sourcing dimmer
Label
Designation
Com
Common –
Ch 2 In
Channel 2 + (optional)
Ch 1 In
Channel 1 +
Please Note:
Attached luminaires need to be configured as
single channel, DMX address (Channel 1 In Only)
or Tuneable White (Channel 1 In & Channel 2 In).
!
DMX Out to next PowerSync™ Data Injector
(optional)
Colour T-568A Colour T-568B Label Designation
Green
Orange
−
Data −
White / Green
White / Orange
+
Data +
White / Brown
White / Brown
GND Ground
Connect to DMX in terminals of next PowerSync
TM
Data Injector for DMX
loop-through functionality.
Refer to third party installation
instructions for details on
dimmer installation.
Label Description
5
0-10 V Dimming: Sourcing / PWM Dimming
6
0-10 V Dimming: Sinking / PWM Dimming: Inverted
2
TEST: All Channels OFF
3
TEST: All Channels ON
4
TEST: Cycle 4 Channels
8
USB
Mode Switch Key
NOTE:
0-10 V level is digitized and
passed out as DMX.
LS6540