IN0098 - 28 August 2015
Copyright ©2015 Lumascape Lighting Industries Pty. Ltd. ABN 21 010 572 773
www.lumascape.com.au
WARNING - To reduce the risk of FIRE or INJURY:
1. Luminaires and transformers to be installed by licensed electrical contractors.
2. Luminaires to be used for intended purpose only.
3. Do not operate the luminaires with a missing or damaged parts.
4. Use only genuine Lumascape parts to replace damaged or missing components.
5. Refer to instructions for installation and operating requirements.
6. Ensure installation complies with local regulations
Voltage insulation test (megger) will permanently damage product and will void warranty.
SAVE THESE INSTRUCTIONS.
SAFETY INSTRUCTIONS
Questions?
Call +61 7 3286 2299
Email [email protected]
www.lumascape.com.au
Mount luminaire to concrete anchor:
If required connet the top part of the luminaire
to power source by re-connecting to terminal
block. Screw top of luminaire to concrete
anchor ensuring the gasket seal is firmly in
place between the two components
5.
Test luminaire:
Turn on power to test functionality of
luminaire.
6.
FINISHED INSTALLATION
5
o
10
o
105
o
365
o
215 mm
265 mm
405 mm
Ø
110 m
m
5
o
10
o
105
o
365
o
215 mm
405 mm
Ø
110 m
m
Ø
140 mm
Finished level
Concrete
It is the installers responsibility to ensure
the luminaire is adequately sealed for its
operating environment during installation.
Correct installation
Incorrect installation. Void warranty
Do not allow soil, fill or any material to build up
around the luminaire. Warranty will be void.
