INSTALLATION INSTRUCTIONS
SURFACE MOUNT
ADJUSTABLE SPOTLIGHT
LUMASCAPE ASIA PACIFIC
Brisbane Technology Park, 18 Brandl Street, Eight Mile Plains, QLD 4113, Australia
Phone +61 7 3854 5000 | Fax +61 7 3854 5001 | Email: [email protected] |
www.lumacape.com
LUMASCAPE NORTH AMERICA
1300 Industrial Road, Unit #19, San Carlos, CA 94070, USA
Phone +1 650 595 5862 | Fax +1 650 595 5820 | Email: [email protected] |
www.lumacape.com
Products and specifications are subject to change without notice.
USA I Australia I Asia I Middle East I Europe
2 / 4
IN0182US N181130
Centria
C4
LS1010
Open Luminaire
Loosen the four screws and remove
the lid and open the luminaire.
Drill the hole for the gland.
Use a 16mm drill bit to drill the
gland hole.
In the base drill out gland holes as
required.
Install Gland
To Light
Engine
Ø16mm
Drill Bit
To Light
Engine
Feed supply cable through
gland and tighten. Outer
diameter of cable should
be Ø5-10mm
O-Ring
To Light
Engine
Outer Cable
Ø5-10mm
