2
LumaPro Operating Instructions
30UH85, 30UH86, 30UH87
LED Flood Light
General Safety Information
READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
Review the diagrams thoroughly before beginning.
All electrical connections must be in accordance with local codes, ordinance, and the
National Electric Code. If you are unfamiliar with methods of installing electrical wiring,
secure the services of a qualified licensed electrician.
Before starting the installation, disconnect the power by turning off the circuit breaker or
by removing the appropriate fuse at the fuse box. Turning the power off using the light
switch is not sufficient to prevent electrical shock.
Equipment should be mounted in locations and at heights where it will not readily be
subject to tampering by unauthorized personnel.
Do not use this equipment for other than intended use.
Risk of fire or electric shock. Installation requires knowledge of
the lighting luminaires electrical systems. If not qualified, do not attempt installation
and contact a qualified electrician.
Wiring Diagram
Turn off electrical power at fuse or circuit breaker box before wiring
fixture to the power supply.
Connecting Driver to AC source supply:
Operating Temp: -30 F to 130F Degrees
1.
All units must be individually connected to the AC supply
Black = Line
White = Neutral
Green = Ground
2.
Line connection to be made to switch lead from source.
