Lumantek ez-LINE VM16, Руководство пользователя

Страница: 19 / 20

ez-Line VM16 : Manual
4.5 Response/ Notification List
Response/
Notification
NOD Description
ok 0 Communication success
error_too_short 0 Communication failure: checksum digit is short
error_bad_checksum 0
Communication failure: checksum parameter is not right,
checksum digit is too long.
error_checksum 0 Communication failure: checksum value is not right
error_invalid_param 0 Communication failure: invalid parameter
error_invalid_comman
d
0
Communication failure: invalid command
state_model 1
Model name output
Data1: Model name (VM16, VS6, VM6, VM4,…)
state_ver 3
Version information
Data1: Major Version
Data2: Minor Version
Data3: Revision
state_cfg_all 16
Information status of 16 outport associated 16 inport
Data1 ~ Data16 : See
Input Channel List
state_cfg_one 2
Information status of specified 1 outport
Data1: See
Output Channel List
Data2: See Input Channel List
state_inloss_all 16
Information status of Signal Loss [off/on] for 16 inport
Data1 ~ Data16: See
Loss List
state_inloss_one 2
Information status of signal Loss [off/on] for specified inport
Data1:
Input Channel loss List
Data2: See
Loss List
state_ipaddr 4
IP address status
Data1~ Data4 : IP address
state_subnetmask 4
Subnet mask status
Data1~ Data4 : Subnet mask address
state_gateway 4
Gateway status
Data1~ Data4 : Gateway address
state_port 1
Port number status
Data1: Port number
state_macaddr 6
Mac address status
Data1~ Data6 : Mac address
state_refinled 1
REF IN LED status
Data1: 0/1 = led off/led on
state_preset0 16
Information status for 16 outport associated with 16 inport
(preset)
Data1 ~ Data16 : See
Input Channel List
state_preset1 16
Information status for 16 outport associated with 16 inport
(preset)
Data1 ~ Data16 : See
Input Channel List
state_preset2 16
Information status for 16 outport associated with 16 inport
(preset)
Data1 ~ Data16 : See
Input Channel List
state_preset3 16
Information status for 16 outport associated with 16 inport
(preset)
Data1 ~ Data16 : See
Input Channel List
state_rcpll 1
RCP Lock Led status [0/1=off/on], 0 respresent RCP controling
Data1: 0/1 = led off/led on
19