EN8 – H.264 8CH HD Encoder / Manual
Enter Destination IP Address and Port and
then press “Apply”.
※
Make sure that Destination IP address or
port are different for each channels.
- Need to set the IP differently, or set the
Port for a different value.
4) Encoder setting for each channel.
※
After changing the Encoder setting on
the NMS, it takes 10 seconds for the EN8 to
be actually applied. Therefore we
recommend user to set all other settings
and NMS change in the end. (IP related
settings are applied immediately)
A) Basic information
A: Model
B: Encoder firmware version
C: Detected Input
