Lumagen Radiance Pro 424 Series, Руководство пользователя, Страница: 17 / 48

Section 6 – Video Output Menu
Copyright 2007-2017 Lumagen, Inc Radiance Pro, Rev 071719 14
Section 6 – Video Output Menu
By default the output is set to “Auto 2” (424X) or “Auto 4” (444X). “Auto 2” means the Radiance automa tically
reads the video EDID from the devices connected to Output 2, and automatically selects the appropriate output
resolution.
For “Auto” modes the output verti cal rate is selected based on the input vertical rate. For example, input formats
480i60, 720p60, and 1080i60 automatically select a vertical output rate of 60 Hertz. Input formats 576i50, 720p50,
and 1080i50 automatically select a vertical output rate of 50 Hz. For a 24p input formats, a 24p output vertical rate
is selected, if the display supports a 24p vertical rate, otherwise a 60 Hz output rate is selected.
Video Output Setup Menu
The
Video Output Setup
menu is used to select output settings (
Mode
,
CMS
, and
Style
) based on the input
number, input memory, and input video resolution and rate. The
Video Output Select Menu
does not affect the
audio settings. See the
Audio Configuration
section for information on configuring audio modes.
NOTE:
The Video Output Setup Menu is not needed for typical systems
To select the output settings based on input, input memory, and input video mode, press MENU → Output
Setup → Ok . This will display the Input Conditions and Output Selections.
Input Conditions
->
Input: 1A Mode: Other, 2D, Rec601
1A
Mode:
Other, 2D, Rec601
Output Selections
Mode: Custom0(Auto 4)
CMS: CMS0
Style: Style0
Out Enables: ABBV (1-4)
Press “OK” again to display the
Video Output Select Menu
. Highlight the ‘2D’ or ‘3D’ row and press “ Ok” to edit.
In Condition -
>
Video Output Selection
3D 601/709 HDR/2020 Enable
In Mode Mode Type CMS CMS Style 1 2 3 4
*2D: 1A 1080p24 -
>
Custom0 CMS0 CMS1 Style0 A V B V
(Auto 4)
3D: 1A 1080p24 - Auto 4 Auto CMS0 CMS1 Style0 A V B V
Next highlight the input condition entry that you want to edit.
2D In Condition -
>
2D Video Output Selection
601/709 HDR/2020 Enable
In# Mem Mode Mode CMS CMS Style 1 2 3 4
1 A 1080p24 -
>
Custom0 CMS0 CMS1 Style0 A V B V
(Auto 4)
NOTE:
For any of the three input conditions you can press the number “4” button which then selects ‘All’ as
the condition and steps to the next column so you to apply the changes to multiple input conditions.
Once selected, the parameters for the
Mode
,
CMS
, and
Style
can be changed. Press the

and

buttons to set
the input number, input memory, and input mode. When making settings that apply to multiple input conditions
you can leave any of the output settings unchanged by selecting the ‘ --- ‘ option for that output setting. The 9 GHz
Video Output card has selections for “A” audio only, “B” both audio and video, “V” video only, “N” no output, and
“ - “ to leave unchanged.
NOTE:
For the 18 GHz output card, the odd output is audio-only or off. The even output
is always audio and video if the odd output audio is enabled, and can be audio
and video, or video only, if the odd numbered output is off.