Textkonserve_HOS 5A_GB
Ensure sufficient space within the working area. Risks for tripping and slipping! Poor order may cause accidents.
Keep the equipment away from heat, sparks and open fire.
Never let the hydraulic oil out on the ground.
Cover- and safety devices may not be modified or removed.
The equipment is designed as a working place for one person. Only the operator should be within the operating area of
the splitter. Non-authorized persons as well as domestic- and farmer animals should be kept on a distance of at least 5
Meters.
Cut- and pinching injuries!
With the equipment in operation, never touch something in the process area.
Always keep full attention to the motions of the push plate.
Live mains! Danger of life!
STOP! Loosen the air bleed screw.
Allow airflow in the hydraulic tank before and during the operation. For transportation: close the screw again.
OPERATING DEVICES
(Fig. 1)
1. Push plate
2. Processing area
3. Wedge
4. Transport handle
5. Legs
6. Guide frame
7. ON/OFF switch
8. Motor
9. Junction box
10. Wheels
11. Hydraulic valve (operating lever)
12. Lever plate
13. Air bleed screw
14. Oil drain outlet
15. Piston rod
INCLUDED ITEMS IN THE EQUIPMENT
Unpack the equipment and check for transport damages. If that would be the case, claim it at the transporting agency.
Check that the equipment is complete.
If parts are missing, inform the seller
Pre-assembled unit (Fig. 1)
PUTTING INTO OPERATION
Setting-up
•
The equipment should be placed on a safe and stable location and be secured against sliding and moving around.
For environmental reasons, put the equipment on a non-slip, tight surface to prevent pollutions to enter in the
ground.
•
Locate the splitter on a working surface with a height of 60 – 75 cm. This offers a comfortable working position.
•
Lock the wheels with wedges to prevent rolling and sliding.
•
Arrange with good lighting and sufficient space at the site to avoid hazards and accidents. Do not use the
equipment close to gases, petrol fumes or any other inflammable materials.
•
Carefully read through the safety prescriptions. (see Safety Prescriptions)
•
Before the equipment is taken into use, all cover- and safety devices must be assembled the right way. When
working with pre-prepared wood logs, ensure that they don´t contain any other material.
DANGER! Modifications of the equipment, or use of spare parts which have not been approved by the
manufacturer, may cause incalculable damages during operation.
•
Always only use the parts contained in the delivery
•
Do not modify the parts!
Содержание HOS5A
Страница 2: ......
