Lumag GF9000GFS, Руководство пользователя, Страница: 29 / 60

-
- 29 -
MAINTENANCE
Problems That May Affect Emissions
If you are aware of any of the following symptoms, have your engine inspected and repaired by your servicing
dealer.
·Hard starting or stalling after starting.
·Rough idle.
·Misfiring or backfiring under load.
·Afterburning(backfiring).
·Black exhaust smoke or high fuel consumption.
Replacement Parts
The emission control systems on your
generators were designed, built, and certified to conform with
EPA and California emission regulations. We recommend the use of generators parts whenever you have
maintenance done. These original-design replacement parts are manufactured to the same standards as the
original parts, so you can be confident of their performance. The use of replacement parts that are not of the
original design and quality may impair the effectiveness of your emission control system.
A manufacturer of an aftermarket part assumes the responsibility that the part will not adversely affect emission
performance. The manufacturer or rebuild of the part must certify that use of the part will not result in a failure of
the engine to comply with emission regulations.
Maintenance
Follow the maintenance schedule on page 12.Remenber that this schedule is based on the assumption that
your machine will be used for its designed purpose. Sustained high-load or high-temperature operation, or use in
unusually wet or dusty conditions, will require more frequent service.
MAINTENANCE