Version 190426-1257
Applications
Your capped IP PTZ is now ready for further installation.
It is designed to be used with the following Luma Surveillance accessories:
}
LUM-MNT-LARM and LUM-MNT-LARM arm mounts, for attaching to a
wall to provide a greater field of view, and
}
LUM-MNT-PND pendant mount, for attaching to a ceiling that has ducting
or other items that obscure vision.
If you are using third-party hardware, attach an adapter to the cap if needed.
Tighten it, then lock it in place by inserting a locking screw into the small hole
at the threads.
Support
If you need help, email [email protected]. For information, instructional
videos, support documentation, or ideas, visit our website.
5-Year Limited Warranty
This Luma Surveillance™ product has a 5-Year Limited Warranty. This warranty
includes parts and labor repairs on all components found to be defective in material
or workmanship under normal conditions of use. This warranty shall not apply to
products that have been abused, modified or disassembled. Products to be repaired
under this warranty must be returned to a designated service center with an assigned
return authorization (RA) number. Contact technical support for an RA number.
Copyright ©2019 Luma Surveillance. All rights reserved.
4: Attaching the Camera
Remove the dome from the PTZ camera (do
not remove the protective cover from the
dome at this time).
Thread the camera wires through the
housing and through the top of the cap.
Attach the camera housing to the cap mount
using the four Phillips screws provided with
the cap mount.
LUM-MNT-CAP-IPPTZ-WH-broadsheet.indd 2
4/26/2019 1:49:06 PM
