manualshive.com logo in svg

LulzBot Mini 2, Руководство пользователя

Поделиться
Скачать
LulzBot Mini 2 Скачать руководство пользователя страница 64

64

Heater resistor

A special type of resistor that is used to apply heat in a small area.

HIPS

High-impact polystyrene. Usually extrudes at 230°C with the Budaschnozzle and 230°C with 

the LulzBot Hexagon Hot End

Hot end

The hot end is the whole part where the plastic melts, including the nozzle, heater block, 

thermistor, and heat sink. The LulzBot Hexagon Hot End comes standard on the Mini.

Layer height

The thickness of each individual deposited layer of the three- dimensional model when cut with 

a slicing program.

Laywoo-D3

Wooden filament similar to PLA. Forty percent of its content consists of recycled wood. Usually 

prints at 180°C to 210°C. Color can be changed by varying the extrusion temperature.

Libre Innovation

Aleph Objects uses Free/Libre Software to build and improve Open Source Hardware so that 

everything we create is free to be viewed, copied, and/or modified by anyone.

Nozzle

The metal tip at the bottom of the hot end. It has a small hole where the plastic filament comes 

out of the printer.

Open Source Hardware

Open source hardware is hardware whose design is made publicly available so that anyone 

can study, modify, distribute, make, and sell the design or hardware based on that design. The 

hardware source, the design from which it is made, is available in the preferred format for 

making modifications to it. For more information visit http://www.oshwa.org/definition/.

PLA

Polylactic acid is a corn-based biodegradable polymer. Usually extrudes at 185°C with the 

Budaschnozzle and 205°C with the LulzBot Hexagon Hot End.

Polycarbonate

A strong and impact-resistant thermoplastic. Usually extrudes at 300°C .

PTFE

Polytetrafluoroethylene is a synthetic fluoropolymer used in the Budaschnozzle for it’s low 

coefficient of friction. This limits the TAZ 1-4 Budaschnozzle top extrusion temperature to 

250°C. The LulzBot Mini does not use a hot end with a PTFE insert and can reach a 300°C 

extrusion temperature.

PVA

Polyvinyl acetate is the main ingredient in white glue, wood glue and the common school glue 

stick.

Содержание Mini 2



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды