Lukhan LK-P11W, Руководство пользователя, Страница: 10 / 12

16
17
4-2. Interface Cable Connection
1. Connect the interface cable to the cable connector of the printer
Notes:
Use only cables provided by this manufacturer
2. Connect the interface cable to the USB or Serial port of the device (PDA, PC, etc)
Serial
USB
5. Printer cleaning
If the interior of the printer is dusty, printing quality can lowered.
In such a case, follow the instructions below to clean up the printer.
NOTE
1. Make sure to turn the printer power off prior to cleaning
2. Regarding print head cleaning, as the print head sets very hot during
printing, turn off the printer power and wait approximately 10 minute before
commencement.
3. When cleaning the print head, take care not to touch the heated portion of the
print head. The print head subject to be damaged by static electricity.
4. Take care not to allow the print head to become scratched and /or damaged in
1. Use an applicator swab moistened with an alcohol solution to clean the print head
and remove any dusts.
2. Once the cleaning is completed, insert paper roll into the printer few minutes later
and close the printer cover.