18
19
Printing Method
Direct Thermal
Printing Speed
80mm/sec
Resolution
203 DPI X 203 DPI
Character
ALPHA NUMERIC Character, Extension Character
Barcode
Code 39, Code 93, UCC/EAN-128, Code 128, UPC-E,
UPC-A, EAN-8, EAN-13, EAN-14, UPC and EAN 2 or 5
digit extensions, Plessey, FIM, Postnet, Interleaved 2-of-5,
MSI, Codabar
Emulation
CPCL
Driver
Window CE 4.2&5.0, Window Mobile 5.0
Sensor
Black-mark, Gap, cover open
Paper
paper type
Thermal Paper
width
58mm
thickness
65
㎕
External Diameter
Max.
Φ
56mm
Internal Diameter
12.5mm +/-0.5mm
Reliability
TPH
100km
Communications
standard
Serial(RS-232C), USB, Bluetooth Class2
option
Wireless Lan *802.11b/g
Battery Charger
input
AC100~240V, 50/6 Hz
output
8.4V , 1200 mA
Battery Charger
Battery type
Li-on
output
7.2V, 2400mAh
Charging time
2
Time
Size
WXDXH(mm)
104 X 74 X 154
WXDXH”
4.0 X 2.9 X 6.0
Weight
500g
6-1. Specification
6. Pritner Specification
5. Printer cleaning
If the interior of the printer is dusty, printing quality can lowered.
In such a case, follow the instructions below to clean up the printer.
NOTE
1. Make sure to turn the printer power off prior to cleaning
2. Regarding print head cleaning, as the print head sets very hot during
printing, turn off the printer power and wait approximately 10 minute before
commencement.
3. When cleaning the print head, take care not to touch the heated portion of the
print head. The print head subject to be damaged by static electricity.
4. Take care not to allow the print head to become scratched and /or damaged in
1. Use an applicator swab moistened with an alcohol solution to clean the print head
and remove any dusts.
2. Once the cleaning is completed, insert paper roll into the printer few minutes later
and close the printer cover.