16
During cutting, the gap between the blade tips (in the transverse direction) must not be
exceeded, otherwise the blade is in danger of breaking:
ATTENTION!
Where possible, avoid cutting through high-strength parts of the vehicle body
(e.g. side impact protection). This may result in damage to the blades or to
increased wear and tear!
eDRAULIC cutting device
max. gap at the blade tips
[mm]
/ [in.]
S 312 E2
3
/ 0.12
S 377 E2
3
/ 0.12
S 700 E2
3
/ 0.12
S 788 E2
5
/ 0.20
7.
Dismantling the equipment / deactivation following operation
Once work has been completed, the device arms should be closed until the tips are only a
few millimeters apart. This relieves the hydraulic and mechanical strain on the equipment.
Clean the rescue device after each operation and grease both the metallic and the
mechanically movable parts.
Greasing provides protection against excessive wear and tear or corrosion.
Avoid storing the rescue equipment in a damp environment.
NOTE:
Never store the eDRAULIC devices with fully closed arms! By fully closing the
arms hydraulic and mechanical tension may develop in the device.
Содержание S 312 E2
Страница 37: ...37 12 EC Declaration of Conformity ...
