Lukas LC 99 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 28

Lukas LC 99 Скачать руководство пользователя страница 12

12

5.

Connecting the device

5.1 General information

5.2 Coupling of (Flat-Face) quick-disconnect coupling

WARNING / CAUTION / ATTENTION!

Prior to connecting the device, ensure that

all the components being used are

suitable for the maximum operating pressure of the pump unit.

In case of

doubt, you

must

contact

LUKAS directly.

The device is connected to the hand pump without the risk of connection error using

Flat-Face quick-disconnect coupling halves (female and male).

NOTE:

The device can only be decoupled when the hoses are

depressurised

.

A Flat-Face coupling is mounted on the device which is connected to the hand pump via a

hose line. The hose is equipped with couplings so that it can be connected without error.

To connect the device, push the male into the female counterpart. To lock, turn the sleeve of

the male counterpart by 90°.

To decouple, turn the sleeve of the male counterpart by 90° again and then pull back.

«
...
10
11
12
13
14
...
»

Содержание LC 99





























Отзывы:

Нет отзывов