User’s Manual
... 15
14
... Lukas Blackbox
■ Segment LED Messages of LUKAS Blackbox ■
Segment LED
Message
Voice Guidance
Description
No SD card detected.
When SD card is not inserted or removed forcibly, 'Sd_FAIL' is
displayed.
SD card cannot be
read.
When SD card is locked, 'Sd_Lock' is displayed.
High temperature
safety mode started.
High temperature
safety mode stopped.
If the blackbox is exposed to a hot environment while the high
temperature safe mode is activated, 'SAFE' is displayed and the
safe mode is executed.
Terminating the
system.
When the power goes off and stops operation, ‘SEE You’ is
displayed.
-
It displays current speed while driving. (GPS models only)
Weekly carfree alarm
function is activated.
It may differ according to the settings.
※
Voice guidance is not available in LK-6300 series
8. How to Use
■ Power Connection ■
■ Recording While Driving ■
First, check if SD memory card is inserted into the main body. Then, start the engine while the power of product is
connected. (Keep the power ON.)
-
#
During the booting
: After the power supply the version is displayed on the segment window. After completion of
initialization, the time is displayed on the segment window.
■ Termination of Recording ■
◈
#
the cigar power is used). Before then, if the working blackbox is stopped in the following order, it is helpful in
maintaining the life span of the product and preserving the data.
1. In case of manual recording, it is better to wait for about 20 sec before removing the power.
2.
#
When the product is turned off,‘See you’ appears on the segment window with the buzzer sound or voice
guidance “Terminating the system”.
*
#
Notice: If SD card is removed before the power off, an error may occur in the recorded image. Be sure to remove
SD memory card only after turning off the product completely.
3. If the power cable is pulled off from the cigar jack, it can prevent the discharge of car battery.
-
#
Driving Recording :
After completion of booting, recording starts with buzzer sound or voice guidance and the
image is saved in AlwaysMovie folder.
-
#
Motion Detection Recording
: When it detects an impact greater than the one set up by the user(Impact, sudden
start, sudden brake), it starts the event recording and issues the buzzer sound once, blinking the segment window.
The image is saved in the EventMovie folder and the total recording time is 30 sec (10 sec before event, 20 sec
after it).
*
The detective level of acceleration sensor can be set up in the environment setup of PC viewer program.
*
If another impact is generated during the event recording, it
*
If the power is turned off during the event recording, the power goes out after the completion of event recording.
-
#
Emergency Recording(Manual Recording)
: Even without any impact, if the emergency recording button is
pressed, the image is saved in the EventMovie folder. The total recording time is 30 sec
(10 sec before event, 20 sec after it)
*
The emergency recording cannot be operated during an event recording.
*
During the emergency recording, no event recording is operated even with an impact.
-
#
If SD card is removed during driving mode recording
(1)
#
cannot be saved normally.
the always recording, the presently recording file
(2)
#
It can have a severe damage on SD card and the product.
