LBCA4 Page 8 of 15
5
、
Fix Electric Box
After ensuring all the cables are connected right, fasten TWO button positions to the fan
body firstly, then fix the electric box with TWO 5x16 screws and flat washers (shown as
picture 7). Installation completed.
Picture 7
Checking after Installation
1
、
Install the product according to the Instructions; check whether all the parts
are firmly connected.
2
、
Twirl the impeller with insulating material, like batten. Check the normal rotation
and isolation between the blades and casing.
3
、
Before using, check whether the voltage and frequency on the nameplate match
those in use. Then add water into the tank (manual inflowing or automatic
inflowing). Check whether there is any leakage of the water tank.
4
、
Power on the product to see its operation. Switch on each speed, check whether it
sounds abnormal, vibrates obviously. Press the button "MIST", 10 seconds later,
rotate the "Mist regulating Switch" from “Min" to "Max", and check whether mist
is normal. Power off the product immediately once there are some abnormalities.
Button
Positions