11
When the programmed time is up, the buzzer
will ring for 2 minutes unless it is switched
off by depressing pushbutton A (
). The
minute minder will not switch off the oven.
The minute minder, even though signaling
other functions, will always buzz for a
maximum of 2 minutes unless interrupted
by depressing push button A(
).
Semi-automatic operation of
the oven
It is possible to start cooking immediately
and to programme the period of the cooking
process.
The maximum programmable cooking period
is of 23 hrs. and 59 mins.
Place the food to be cooked into the oven,
turn the function and thermostat knobs to the
desired setting and proceed as follows:
depress pushbutton B (
-
) and,
keeping it depressed, enter the required
cooking period with knob E; when you
release pushbutton B (
-
), the
"AUTO" pilot lamp and lamp
will
remain switched on indicating that the
programme is operating. At the end of the
cooking process the buzzer will ring. At the
same time pilot lamp
switches off and
the "AUTO" pilot lamp flashes.
Return the function and thermostat control
knobs to their off position, depress pushbotton
D (
) to switch off the "AUTO" lamp and
lamp
switches on.
Use
Current time setting
The clock is preset to show the hours from 1
to 24 and the minutes from 0 to 60.
When first connecting the appliance to the
power supply, the numbers of the display and
the "AUTO" pilot lamp will flash indicating
that the clock needs to be set.
To enter the current time proceed as follows:
simultaneously depress pushbuttons A (
)
and B (
-
) and turn knob E as required
until the correct hour and minutes are
entered.
The electronic clock stars when you release
pushbuttons A (
) and B (
-
)
("AUTO" pilot lamp off and lamp
on).
For further resetting repeat the above
sequence.
Setting the minute minder
with sound signal (buzzer)
The minute minder can be used only with the
programmer set on manual operation (knob D
depressed).
The maximum programmable time for the
buzzer is 23 hrs. and 59 mins.
Proceed as follows to set the minute minder:
depress knob D (
) ("AUTO" pilot lamp
switches off and lamp
switches on);
depress pushbutton A (
) and at the same
time turn knob E and set the desired time
period.
Release pshbutton A.
