Page 6
LASER SAFETY
AVOID EXPOSURE:
Laser radiation is emitted from this product. Use of controls,
adjustments or procedures other than those specified herein may result in laser radiation
exposure. Never stare directly at the beam or view directly with optical instruments.
This label is attached to the unit at the laser aperture.
IMPORTANT:
“DANGER” labels are attached to every LCL4. They are not to be removed or
defaced.
Do not disassemble or attempt to perform any internal servicing. Doing so will void the
warranty. Repairs or service to this device are to be performed by authorized service
centres only. Do not aim the laser beam at people or
animals.
The LCL4 contains semiconductor laser diodes with
wavelengths of 635-650 nanometers. The total continuous
output of the beams never exceeds 4.99 milliwatts. The
LCL4 complies with US CDRH performance standards, 21
CFR, Sub chapter J and the regulations stipulated in EN60825-1/1994.
1. Open the battery cover
2. Place all three AA batteries into the battery compartment according
to the battery installation indicators displayed in the battery
compartment.
Note:
Alkaline batteries offer the longest battery life when used in this
device. This device can not use rechargeable batteries.
AVOID EXPOSURE
LASER LIGHT IS EMITTED
FROM THIS APERTURE
BATTERY PLACEMENT
