2
LR600
Lufkin LR600
The LR600 is a professional instrument with an extremely rugged design, enabling precision
automatic levelling. Self-levelling range ± 5° horizontal, accuracy 1 mm / 10 m, temperature-
resistant sensor system (SLS). Highest reliability is guaranteed through the anti-drift system
(ADS): The electronics permanently monitor the measuring process and switch the laser off in
the case of any outside interference or disturbance. Adjustable horizontal tilt, easy one-button
operation. Includes LRD120 laser detector and remote control unit.
General safety instructions
Caution: Do not look directly into the beam.
Lasers must be kept out of reach of children.
Never intentionally aim the device at people. This
is a quality laser measuring device and is 100%
factory adjusted within the stated tolerance. For
reasons of product liability, we must also draw
your attention to the following: Regularly check the calibration before use, after transport and
after extended periods of storage. We also wish to point out that absolute calibration is only
possible in a specialist workshop. Calibration by yourself is only approximate and the accuracy
of the calibration will depend on the care with which you proceed.
Limited Lifetime Guarantee
Apex Tool Group quality products are Guaranteed against any defect in material or workmanship.
Damage caused by abuse, improper use or excessive wear is not covered by this warranty.
This warranty is provided in addition to other rights and remedies you have under law: Our
goods come with guarantees that cannot be excluded under the Australian Consumer Law. You
are entitled to a replacement or refund for a major failure and for compensation for any other
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major
failure.
Claims should be returned, with proof of purchase, to the place of purchase or returned prepaid
to the address on back page of this guide. Repaired or replacement goods will be returned at our
cost.
Note:
This product is a precision instrument that must be handled and treated with care.
Avoid shocks and impact. Always keep and carry in the case! Switch all lasers off when not
in use. For cleaning, use a soft cloth and glass cleaner.
L a s e r l i g h t !
D o n o t s t a r e i n t o t h e
b e a m o r v i e w d i r e c t l y
w i t h m a g n i f i e r s .
C l a s s 2 / 3 l a s e r
E N 6 0 8 2 5 - 1 : 2 0 0 7 - 1 0
Scan Mode
Slope
