Lufft CHM 15k, Руководство пользователя

Страница: 67 / 73

Operating Manual CHM 15k R13 / 07-2019
Appendix 67
11
Appendix
11.1 CHM 15k device hardware version
Revision Implementation date Amendments Comment
REV 01 01.05.2014 Lufft hardware status 1 First version of Lufft
hardware revision
REV 02 01.09.2014
Update CHM Mainboard, new:
41.61225 old 61125
New: 61225
REV 03 01.06.2015
1) DSL cable new:
2) RS485 cable new 2x2x0.34
3) LaserController upgrade
4) VDSL modem R4
1) TWINAX-
Lapp#:2170050
2) Unitronic (DIN
color scheme)
3) R1 release
4) MEG250AE
REV 04 1.7.2015
Processor board new, due to
obsolete parts 8350.MCP
(old 551, new 552)
REV 05 29.7.2015
CHM Mainboard new due to
obsolete parts on base board 8350.MCU
REV 06 1.6.2019
EMC and safety related
improvements
Table 23 Hardware revisions (HardwareVersion 0 means value not set)
11.2 CHM 15k software version
This manual corresponds to firmware version 1.020 of September 2019 for the CHM 15k ceilometer.
OS / FPGA
release Description Released
OS 12.12.1
FPGA 2.13
CPU 550 : bad block handling implemented
Reset ADC temperature sensor
Dec 2012
OS 15.06.1
FPGA 2.13
Original release for CPU release 552
Jun 2015
OS: 15.12.1
FPGA 2.13
Ethernet driver: solves communication issue in direct connection,
Laptop
– CHM15k
Host name is set correctly (device name). Host name is used by AFD
„%h“ and submitted to a DHCP-server. In the web interface the IP
and the host name can be entered, e.g. CHM160122.lufft.de
Dec 2015
OS 16.05.1
FPGA 2.13
Web-update release of 15.06.1 (same content as 15.12.1)
May 2016
OS 17.05.01
FPGA 2.13
Boot problem with some SD cards fixed
May 2017
OS 18.10.01
FPGA 2.13
Only relevant for production. (Device-dependent use of the
EEPROM (e. g. laser life time for CHM8k))
Oct 2018
Table 24 Operating system / FPGA releases