When setting-up the transmitter for the first time, the ‘fixed’ RDS
content must be programmed via the USB interface, using a Windows™
PC or Laptop running the free software available at
lucorobroadcast.com/support.
1. Connect a USB cable to the USB port on the rear of the transmitter.
If the transmitter is not in service apply power. REMEMBER: Never
operate a transmitter without a test load (‘dummy load’) or matched
antenna system connected to the RF Output.
2. Ascertain the COM Port assigned for the USB connection:
Go to Windows® Device Manager and expand (Ports COM & LPT)
branch.
Make a note of the COM port number designated to the transmitter.
Avoid using COM ports above 9. If necessary, override the COM port
number assigned by Windows under ‘Advanced Settings’.
3. Download (https://lucorobroadcast.com/support) and open the RDS
Programming Application.
RDS
