Lucom lr77 v2, Руководство по настройке

Страница: 91 / 156

3. CONFIGURATION
Continued from previous page
Item Description
BIN1 – SMS SMS text messages when activate the binary input on
the expansion port.
BIN2 – SMS SMS text messages when activate the binary input on
the router.
BIN3 – SMS SMS text messages when activate the binary input on
the router.
BIN4 – SMS SMS text messages when activate the binary input on
the router.
Table 59: SMS Configuration
After you enter a phone number in the Phone Number 1 field, the router allows you to
configure the control of the device using an SMS message. You can configure up to three
numbers for incoming SMS messages. To enable the function, mark the
Enable remote control
via SMS check box. The default setting of the remote control function is active.
Item Description
Phone Number 1 Specifies the first phone number allowed to access the router us-
ing an SMS.
Phone Number 2 Specifies the second phone number allowed to access the router
using an SMS.
Phone Number 3 Specifies the third phone number allowed to access the router
using an SMS.
Table 60: Control via SMS
• If you leave the phone number field blank, then you can restart the router using an
SMS Reboot message from any phone number.
• If you enter one or more phone numbers, then you can control the router using SMS
messages sent only from the specified phone numbers.
• If you enter the wild card character ∗ , then you can control the router using SMS
messages sent from any phone number.
84
09-05-16
LUCOM GmbH * Ansbacher Str. 2a * 90513 Zirndorf * Tel. 09127/59 460-10 * Fax. 09127/59 460-20 * www.lucom.de
w
w
w
.luco
m.d
e
inf
o@lucom
.de