47
CMOS SETUP UTILITY Copyright © 1984 – 2001 Award Software
SIS OnChip IDE Device
Internal PCI/ IDE
Both
Item Help
IDE Primary Master PIO
Auto
IDE Primary Slave PIO
Auto
Menu Level
"
IDE Secondary Master PIO
Auto
IDE Secondary Slave PIO
Auto
Primary Master UltraDMA
Auto
Primary Slave UltraDMA
Auto
Secondary Master UltraDMA
Auto
Secondary Slave UltraDMA
Auto
IDE Burst Mode
Enabled
↑
↓
→
←
: Move Enter: Select + / -/ PU / PD: value F10: save ESC: Exit F1: General Help
F5 : Previous Values F6:Fail-Safe Defaults F7: Optimized Defaults
IDE Channel Settings
The following table explains IDE channel settings and what they mean:
Values
Meaning
Disabled
Primary
Secondary
Internal PCI/
IDE
Both
Auto
The BIOS will assign a PIO mode to this device automatically
when appropriate
Mode 0
Mode 1
Mode 2
Mode 3
xxx PIO
Mode 4
Select a PIO Mode here. PIO mode 0 is slowest, PIO mode 4 is
fastest, check your HDD to see what PIO mode it supports.If
your IDE device supports UDMA mode, then it best to enable
that mode since it is considerably faster than PIO mode. (Set to
auto for auto-detection)
Auto
The BIOS will automatically use Ultra DMA Mode if the IDE
device supports it.
xxx - UDMA
Disabled
This will disable the use of Ultra DMA for this device.
Enabled
Block mode allows faster transfer of data between the system
and the HDD. Most modern HDDs support it.
IDE HDD
Block Mode
Disabled
Block Mode is not used.
Содержание P4SAD
Страница 32: ...27 3 Setup3 Install Sound Driver Path root SISdrive audio Setup exe...
Страница 54: ...49...
