38
ACPI function
:Disabled
:Enabled (default)
Power Management
--users can configure their own power management
:User Define(default)
:Min Saving
:Max Saving
:Disabled
PM Control By APM
No : system BIOS will ignore APM.
Yes : (default) system BIOS will wait for APM's prompt before it enter any PM
mode, e.g. Doze, standby or suspend.
Note1: if APM is installed, and there is a task running, even if the timer is time out, the
APM will not prompt the BIOS to put the system into any power saving mode!
Note2: If APM is not installed, this option has no effect.
Video Off After
:Standby, Doze, NA, Suspend (default)
Video Off Method
:DPMS
:Blank Screen
:V/H SYNC+Blank (default)
MODEM Use IRQ
:3 (default)
:4, 5, 7, 9,10,11, NA
Doze mode
:disabled (default), 1 min --- 1 hour
Suspend mode
:disabled (default), 1 min --- 1 hour
Содержание 6VA693T
