8
Care and Cleaning
ScoopFree™ seldom needs cleaning because of its revolutionary
design; surfaces most likely to get soiled are discarded with each
cartridge. Nevertheless, you may occasionally choose to clean
ScoopFree™
as follows
:
•
Remove power cord from litter box.
•
Remove Waste Lid by tilting it out. It should fall out of its slots.
•
Wipe all surfaces with mild soap and water.
•
Wipe rake with sponge or brush.
•
Make sure optical sensors are not blocked.
•
Do not immerse your ScoopFree
in water or spray it down.
•
Do not expose your ScoopFree
to excessive sunlight or
moisture.
Troubleshooting
Common Issue
Remedy
Indicator light is
flashing rapidly
and rake is stalled.
Check if waste trap is full. If so, replace cartridge.
Check for any obstructions. If so, remove obstruction
and then press cycle button.
Ensure litter is evenly distributed and waste lid is
properly installed. Never add extra litter.
If light is still flashing rapidly, unplug box, remove and
reinstall cartridge and plug box back in. Then press
cycle button to reset box and activate rake.
Waste has
collected behind
the rake
Press cycle button to move rake forward and then press
button again to stop the rake. Remove debris and press
cycle button to reset the box.
To re-attach waste lid,
position as shown, then
slide pins into the slots
and rotate down.
