background image

DESCRIPTION  

  

A. Concentrator 

B.  Air Inlet Cover  

C. Switch 

D.  Hanging loop

HOW TO USE YOUR HAIR DRYER

1.  Adjust the desired blowing strength: 

Position 0: OFF 

Position 1: Half power, medium temperature 

for gentle drying and styling 

Position 2: Full power, high temperature for 

quick drying

2.  Use the high setting for drying hair, and use 

low setting for styling.

3.  Should the hair dryer stop working for any 

reason, turn it off at once and let it cool down.

4.  Always ensure the switch is set to OFF posi-

tion before plugging the unit in the power 

outlet. 

DANGER-To reduce the risk of electrocution:

1.  Always unplug this appliance immediately 

after use.

2.  Do not use while bathing.

3.  Do not place or store this appliance where it 

can fall.

4.  Do not place or drop into water or other 

liquid.

5.  Do not reach for an appliance that has fallen 

into water. Switch off and unplug from the 

mains.

6.  Do not leave the appliance unattended while 

it is operating. 

 

WARNING:

 

This appliance is not intended for use by 

persons(including children)with reduced physical, 

sensory or mental capabilities, or lack of experi-

ence and knowledge, unless they have been given 

supervision or instruction concerning use of the 

appliance by a person responsible for their safety. 

 

Children should be supervised to ensure that they 

do not play with the appliance. 

 

Do not use this appliance near bathtubs, showers, 

basins or other vessels containing water.

When the hairdryer is used in a bathroom, unplug 

it after use since the proximity of water presents a 

hazard even when the hairdryer is switched off.

For additional protection, the installation of a 

residual current device (RCD) having a rated 

residual operating current not exceeding 30mA 

is advisable in the electrical circuit supplying the 

bathroom.

If the supply cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly 

qualified persons in order to avoid a hazard.

 

 

In order to avoid risk, the appliance must only 

be repaired or replaced by the manufacturer, 

maintenance department or the professional staff 

from the similar department should repairing be 

needed.

Отзывы: