The set contains all the attachments and
accessories you need to maintain a well-groomed
look for your hair and beard.
Parts
A. Wide trimmer attachment, cutting head
B. ON/OFF switch
C. Charging contacts
D. Storage stand and charger
E. Indicator lamp
F. Clip-on comb attachment
G. Cleaning brush
H. Clipper oil
I.
Battery access button
J. Battery compartment
How to use:
Setup of Battery
1. Open the battery compartment(J), using the
battery access button(I).
2. Insert the rechargeable AA battery (supplied)
into the battery compartment
3. Close the battery compartment
Preparing for use
The appliance as supplied by the manufacturer
is not yet ready for use. It must be electrically
charged prior to use.
1. Insert the plug of the battery charging stand (D)
into socket. Warning! This appliance must be
charged at the correct voltage (230V 50/60Hz).
2. Ensure appliance has been switched off, move
switch(B) down ‘off ‘.
3. Place appliance in the battery charging stand so
that the indicator lamp (E) lights up.
A charging period of 16 hours is required before
initial use. Keep charging contacts clean, soiled
charging contacts may interfere with the recharge
process. You may charge the appliance for more
than 16 hours, it is not possible to over charge.
Once the appliance has been charged, it is ready
to use. It can be used with or without the clip-on
comb.
Attachments
To attach the clip-on comb slide it onto the cutting
head until it clicks into position.
To remove: Pull it off.
Hair Length Comb
The hair can be cut to 6 different lengths ranging
from approximately 3mm to 14mm.
To adjust the comb attachment, simply slide it up
or down the cutting head, you will hear it click into
place.
Содержание BTRRTS7A
Страница 5: ......
