Fig. 3
Fig. 2
Fig. 1
STEP #1
Insert A-frame gable supports (Part L) into
top of corner stands (Part C and Part D) and
center stands (Part G). Slide ends of tubing
down as far as possible.
STEP #2
Install the two-way end clamps (Part M) at
the center of each A-frame gable support
(Part L) that rests on corner stands (Figure 1).
If installing on a 10' or 15' long kennel, install
three-way center clamp (Part N) at the
center of A-frame gable supports that rests
on center stands (Figure 2). Center ridge pole
(Part O) between A-frame gable supports and
tighten (Figure 3).
STEP #3
Unfold kennel cover material and drape over
kennel cover frame. Secure with elastic tie
downs (Part P - not shown).
Hint!
Avoid over stretching the tie downs as
it could cause damage to grommets.
Parts L-O
Hi-Rise 5'x5' 10'x5' 15'x5' 10'x10'
L
A-Frame Gable Supports
2
2
3
4
3
LL
M
Two-Way End Clamps
2
2
2
2
2
N
Three-Way Center Clamps
0
0
1
2
1
O
Center Ridge Poles
1
1
2
3
2
P
Elastic Tie Downs (not shown) 8
8
12
14
14
OPTIONAL: WEATHERGUARD™ KENNEL COVER AND FRAME
INSTALLATION INSTRUCTIONS
To purchase a Weatherguard
™
Kennel Cover for your Lucky Dog
™
Kennel contact customer service at 1.800.955.2879
L
M
N
O