Lucks SM160B AR, Инструкция по эксплуатации и техническому обслуживанию

Страница: 57 / 92

MAN019.00
57
Figure 9-Errore. L'argomento parametro è sconosciuto.
Access can only be gained to the hydraulic unit (Errore.
L'argomento parametro è sconosciuto.) after having
removed the corresponding machine column casing,
located on the side of the machine column.
The hydraulic unit which has been installed on the
machine is ready for use when the machine is started up.
However, it is recommended that during the first few
hours of operation the operator check that no foam forms
in the tank. The presence of foam in the tank occurs when
air enters into the pump and the end of the discharge tube
is fully immersed in the oil; therefore check the oil level
in the tank.
SCHEDULED MAINTENANCE
Description of
Operation Frequency Date of Operation
Clean exterior of
hydraulic unit every four months
Top up oil when oil level reaches
minimum level
Replace oil every 3000 hours of
operation
Clean interior of
hydraulic unit every 3000 hours of
operation
Clean intake filter every two months
Recommended spare parts for routine maintenance
Description
Filter cartridge: FAM 20 MN;
Joint ring: R62,
Pressure gauge: MG 63 0-100;
Coil BT CS 24/AC.