Lucent 5ESS DRM Скачать руководство пользователя страница 181 | Manualshive

Страница: 181 / 642

Lucent 5ESS DRM Скачать руководство пользователя страница 181

4.4

Backup Administrative Workstation Operating System

OVERVIEW

This procedure should be run following an update to the AW operating system or the
3B21 emulator. This procedure should be used whenever a software update is applied
which has

TARGET=EMULATOR

.

PROCEDURE

1.

If an MCC page is displayed, switch to the

UNIX

1

console of the AW, by holding

down the Ctrl key and pressing

Enter

(not Return) on the

MCC

.

2.

If a login prompt does not appear, press

Return

repeatedly until one appears.

3.

At the login prompt, login as

awadmin

, for example:

console login:

awadmin

4.

From the Administrative Workstation Main Menu, select "Backup the
workstation Operating System/Emulator to disk.” (If you select a task by
mistake, answer

no

to the confirmation, and the main menu will return.)

5.

From the Operating System/Emulator Backup to Secondary Disk Menu, select
"Execute backup of the workstation Operating System/Emulator to disk." Answer

yes

to the confirmation.

Response:

You have chosen to backup the workstation Operating System/Emulator to

disk.

Do you want to continue? (yes/no)

yes

This task takes about 15 minutes

6.

If the AW is a

Netra

2

t 1120, answer

no

to the following response:

Response:

Do you want to set the secondary disk bootable?

no

If the AW is a

Netra

20 or

Netra

240 and the AW is running on the primary disk,

answer

yes

to the following response:

Response:

Do you want to set the secondary disk bootable?

yes

When completed, you will be prompted to press

[RETURN]

. When the prompt

appears press

[RETURN]

or

[ENTER]

on the alpha keyboard.

7.

If you wish to view the output of this OS backup, select "View output from the
most recent operating system/emulator backup to disk." While viewing the
output, use the following keys:

1.

Registered trademark in the United States and other countries, licensed exclusively through X/Open
Company, Limited

2.

Registered trademark of Sun Microsystems, Inc.

235-200-150
October 2005

ADMINISTRATIVE WORKSTATION MAINTENANCE

Procedure 4.4

Issue 3.00H

Page 4.4-1

«
...
179
180
181
182
183
...
»

Содержание 5ESS DRM



































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов