The 8400-Series Voice Terminals Instructions for Installation, Switch,
Administration, and Programming the Options
555-015-725
Issue 1
October 1996
Switch Administration
Page 5-27
Administering the 8434DX Voice Terminal
5
)
*
A
standard feature button should be administered, if access to the System
Directory is provided. It is also desirable for a
standard feature button to
be administered.
†
This feature is available only with a DEFINITY G3V2 (or later) switch.
‡
This feature can be used ONLY on a DEFINITY G3V3 or later. Also, note that after you
press the softkey under the VuStats feature (Stats), the statistics information will remain
on the display for only approximately five seconds before it is overwritten by the softkey
menu. In order to continuously display the statistical information, you should administer
this feature on one of the call appearance/feature buttons instead of administering it as
a softkey feature.
** When administering the Wait feature, use “-w”; when administering the Stop feature
use “-W.”
†† This feature CANNOT be administered on a DEFINITY G2 or System 85 switch.
Table 5-11.
Alternate Softkey Features for the 8434DX
Abbreviation
Feature
AD
Abbreviated Dialing buttons (can be multiple buttons)
Count
ACD Stroke Count (can be up to 10 buttons)
CPkUp
Call Pickup
Dir
*
Directory
HFAns
†
Internal (Hands-Free) Auto Answer
IAuto
Automatic Intercom
IDial
Dial Intercom
Inspt
Inspect
Last
Last Number Dialed
RingOf
Ringer Off
SAC
Send All Calls
SFunc
AD Special Function Pause
Stats
‡
AD Special Function Suppress
Stop
**
AD Special Function Mark
View
††
AD Special Function Wait
Call Display
Next Display