Lucent Technologies PortMaster 4, Руководство по настройке

Страница: 117 / 191

Using External Modems 9-3
Using Automatic Modem Configuration
The modem type is either system or user. System indicates that the configuration
settings are the factory default settings. User indicates that the user has configured the
modem table settings for that modem.
To display the settings for a particular modem, use the following command:
Command> show modem ModemName(short)
The display for a modem looks like this:
Adding a Modem to the Modem Table
To add a modem to the modem table, use the following command:
Command> add modem ModemName(short) “ModemName(long)” Speed “String”
For example, to add a Paradyne 3811+ modem to the modem table, enter:
Command> add modem para3811 “Paradyne 3811+" 115200 “AT&FS0=1&W\r^OK"
Note – Use a \r for a carriage return, and a caret (^) to separate the send and expect
characters in the string. In the example above, the PortMaster expects OK. Never use
on or off for a modem short name.
Table 9-1 shows the current factory default settings for commonly used modems.
Short Name: supra-fax-288
Long Name: SupraFax 28.8
Optimal Speed: 115200
Type: User Defined
Init Script: Send Command Wait for Reply
------------------------------------------- ------------------
AT&F2&C1&D3S0=1S2=129s10=20&W OK
Table 9-1 Factory Default Modem Table Entries
Modem Name
(Short) Modem Name
(Long) DTE
Rate
Initialization String
at&t-v32 AT&T Keep In
Touch 57600 AT&F&D3&T5&R0\\D1S0=1&W^OK
cardinal Cardinal
MVP288XF 115200 AT&F1&C1&D2&K3S0=1S2=129S10=20&W0&
W1
card-v34-p Cardinal
MVP288CC
PCMCIA 115200 AT&F&C1&D3S0=1s2=129S10=20&W
eiger-v32-p Eiger 14.4 PCMCIA 57600 AT&F&C1&D3S0=1S10=20&W
eiger-v34-p Eiger 28.8 PCMCIA 115200 AT&F&C1&D3S0=1S10=20&W
gvc-14.4 GVC/Maxtech V.32 57600 AT&F&C1&D3S0=1S10=20&W0
gvc-28.8 GVC/Maxtech V.34 115200 AT&F&C1&D3S0=1S10=20&W0
✍