Lucent Technologies PacketStar PSAX 45N74, Руководство пользователя

Страница: 18 / 104

Chapter 1 Getting Started
Conventions
1-6 255-700-585
PacketStar
®
PSAX 3-Port DS3/E3 ATM Protection Module User Guide
, Issue 1 Release 10.0.0
Use of Command Description Tables
All illustrations for configuration windows in this guide for the PSAX system
console interface are followed by a command description table describing the
command functions displayed on the window (near the bottom of the win-
dow). You should read all the information in the command description table,
especially when first using a window, because these descriptions may have
special instructions or configuration constraints provided in the Function col-
umn by use of the
Note:
text convention (see Table 1-2).
Use of Field Description Tables
For all illustrations for configuration windows in this guide for both the
PSAX system console interface and the EMS-PSAX, the field description
tables normally follow the command description tables. Field description
tables define the editable and the display-only fields, their functions, valid
values, and constraints, if applicable. As in the command description tables,
the
Note: text convention is also used, where appropriate, in the field descrip-
tion tables to alert the user to special instructions or configuration constraints
(see Figure 1-1).
Table 1-2. Command Description Table Example
Command Function
Bring All Interfaces
Into Service Brings the out-of-service configured interfaces to in-service status.
Note:
In GR-303 configuration, it is critical to bring into service
only those channels actively configured with DS1 ports.
Figure 1-1. Field Description Table Example
Field Name Field Values Description
Interface Type Default: 0
Range: 0-22
Format: Numeric Specifies the type of end-to-end connection
protocol that governs the transmission parameters
for this configured port and channel interface.
Note:
When certain types of interfaces are select-
ed in this field, other configuration fields are dis-
played on this window.
Identifies editable fields
or display-only fields on
screens Identifies initial field
value default Describes the function of the field
and special instructions for
configuring modules
Identifies available
range for field value
when applicable Identifies field value format as
Numeric, Predefined Alphanumeric,
Hexadecimal, or Valid Dotted Quad.
Decribes special instructions or
configuration constraints