Installation
2-4
Issue 1 January 1997
1.
Enter the appropriate information in the verification checklist below:
A personal computer (PC) with the recommended class, speed, RAM, and
storage configuration for your expected traffic and two available serial ports.
Make/model:
Class/speed: RAM: Mb
Hard Disk: Mb
Keyboard and mouse
(indicate mouse type: bus, serial, or PS/2):
Graphics monitor
(type):
(Check one)
Windows 3.1 , Windows for Workgroups 3.11 , or Windows
95 , with a default configuration. DO NOT USE DISK COMPRESSION.
Parallel printer and driver, setup using Printers from Windows Control
Panel on
(check one)
LPT1 or LPT2 . Printer name:
Serial port for SMDR input: COM
9600-baud (or faster) modem for Remote Access (for more details, see
Appendix C), installed on
serial port COM . Phone Number:
MERLIN LEGEND II Communications System (Release 4.1 or later) with
programming options as described in Establishing the SMDR Interface later in
this chapter.
(check all that apply)
ASA or DXD
SMDR
Hybrid or Key Mode
Incoming lines with Caller ID (ICLID = Individual Calling Line Identification)
We recommend purchasing this service for all incoming lines as it is useful in identifying the location
from which calls are arriving. MERLIN LEGEND Reporter supports ICLID, useful in measuring
customer response to advertising and promotions, facilitating customer callbacks, etc.
2.
Verify the contents of your MERLIN LEGEND Reporter package:
This book
Remote Access software (Carbon Copy
Host - 4 diskettes)
MERLIN LEGEND Reporter software (6 diskettes):
— Setup Disk
— Program Disks 1 and 2
— Configuration Disk
— Call Collection Disks 1 and 2
D8W modular cord
355 A/F adapter (modular-to-DB25 female)
DB25-to-DB9 adapter (25-pin to 9-pin)
Содержание MERLIN LEGEND Reporter
Страница 1: ...MERLIN LEGEND Reporter Installation and Use...
Страница 96: ...PSU at a Polled Site Issue 1 January 1997 7 5...
Страница 121: ...Worksheets Issue 1 January 1997 A 15...