A
B
FIGURE 3 Installing Anchors
C Align the screw holes in the mounting plate with the anchors.
D Insert one of the screws provided (Figure 2) into the upper hole in
the mounting plate and partially thread it into the anchor. Insert
the remaining screw into the lower screw hole and partially thread
it into the anchor.
E Continue with the instructions in Step 5.
5
Tighten both screws. Then loosen them so you will be able to
remove the mounting plate at a later date if necessary.
6
Locate one strip of double-sided tape and remove the protective
paper liner from one side.
NOTE: Avoid touching the sticky surface of the tape.
7
Affix the tape’s sticky side to the center of the left edge of the mount-
ing plate (Figure 4).
iss 2, cib3063-4
