Lucent Technologies CentreVu Supervisor, Руководство по установке и началу работы

Страница: 245 / 306

CentreVu Supervisor Version 8 Installation and Getting Started
Installing and Using CentreVu Terminal Emulator
Using Terminal
8-21
●
Dial Suffix—enter the characters to send to the modem after the Phone
Number of the remote host. For example, if an extension has to be dialed
after the telephone number of the remote host, enter it here.
●
Hangup String—enter the characters to send to the modem to cause it to
hang up the connection. The default is ATH.
●
Reset String—enter the characters to send to the modem to cause it to reset
itself. The default is ATZ.
●
Auto Retry—turns the auto retry option on or off. If the check box is not
selected, the modem tries only once to establish a connection to the remote
host.
●
Allow xx seconds for connection—enter the maximum time to wait for the
connection to be established. The valid values are 1 to 999 seconds. The
default value is 45 seconds.
Font Tab
8
Select the Font tab to change the font size used by the Terminal when you are
using CMS. Below is an illustration of the standard font settings for Terminal: