Lucent Technologies Cajun P220 страница 167 Скачать руководство пользователя

Страница: 167 / 335

Configuring IP Routing (Layer 3)

Cajun P550/P220 Switch Operation Guide

7-41

Table 7-28.

Upstream Prune Information

In the

Downstream Interface(s)

field, click the

number

to view information on

the downstream interface. The DVMRP Downstream Link(s) dialog box opens.

Use Table 7-29 to view the DVMRP Downstream Links information.

Parameter

Displays the...

Destination Group
Address

Destination group address of the multicast session.

Source SubNetwork

Subnet on which the DVMRP interface exists.

DVMRP Upstream
Interface

Name of the upstream interface.

Interface Type

The interface type. Types include:

•

Broadcast

- All traffic is forwarded through the routers. This

is not a tunnel and does not require encapsulation.

•

IPIP Tunnel

- All multicast traffic (data and protocol

messages) on this interface is encapsulated in IP unicast
packets with the protocol set to IPIP (IP in IP).

•

Non-Encapsulated Tunnel

- All multicast data traffic on this

interface is IPIP encapsulated, but the protocol messages are
simple unicast.

Interface is Pruned

Status of whether the interface has been pruned.

Prune Expiration Time
in sec

Time (in seconds) that the interface times out waiting for the
prune message to expire.

Table 7-29.

DVMRP Downstream Links Parameters

Parameter

Displays the...

Destination Group Address

Destination group address.

Source SubNetwork

Source subnetwork.

DVMRP Downstream Interface

DVMRP Downstream interface.

Interface Type

Interface type. Types include:

•

Broadcast

- All traffic is forwarded through the

routers. This is not a tunnel and does not require
encapsulation.

•

IPIP Tunnel

- All multicast traffic (data and protocol

messages) on this interface is encapsulated in IP
unicast packets with the protocol set to IPIP (IP in IP).

•

Non-Encapsulated Tunnel

- All multicast data traffic

on this interface is IPIP encapsulated, but the protocol
messages are simple unicast.

Содержание Cajun P220
















































































































































































































































































































































Результаты поиска

Содержание Cajun P220

Отзывы:

Похожие инструкции для Cajun P220

Бренды по названию

Популярные бренды

Lucent Technologies Cajun P220, Руководство по эксплуатации

Результаты поиска

Содержание Cajun P220

Отзывы:

Похожие инструкции для Cajun P220

Бренды по названию

Популярные бренды