Lucent Technologies CAJUN M770, Руководство пользователя

Страница: 116 / 266

Chapter 8 Managing PVC Connections
98 Cajun M770 ATM Switch User’s Guide
Listing the current PVC connections
To list all current PVC connections which are set up on the M770 ATM Switch, use
the
pvc show
command.
The
pvc connection show
command displays the information described in Table
8.1.
Disabling a PVC connection
To temporarily disable an established PVC connection, use the
pvc disable
command.
Command:
M15-155s8:/>pvc show
Output:
--ID-- VCL1 VCL2 Admin Oper
800 001 8.1.0.1009 8.2.0.1011 UP UP
800 002 8.1.0.1010 8.2.0.1012 UP UP
Table 8.1 Output from the pvc connection show command
Field Description
ID Unique identifier for the PVC connection, assigned by the switch.
VCL1 The transmitting VCLs for a PVC connection.
VCL2 The receiving VCLs for a PVC connection.
Admin The management state of the PVC connection.
If the state is “UP” then this PVC connection is enabled.
If the state is “DOWN” then this PVC connection is disabled. This will
occur if you have disabled the PVC connection using the command-
line interface.
Oper The operational state of the PVC connection.
If the state is “UP” then this PVC is functional.
If the state is “DOWN” then this PVC is not functional. This may be
because either the PVC is disabled or a port (on this switch) used by
the PVC is down.
Command:
M15-155s8:/>pvc disable <pvc-id>
Example:
M15-155s8:/>pvc disable 800001
Parameter:
<pvc_id>
An unique PVC identifier.