Lucent Technologies 7303H01, Быстрый старт

Страница: 8 / 16

Tab
Tab
FIGURE 7 Assembling the Wall Mount (Bottom View)
3 Lift the base and push the wall support through the slots until it fits
firmly in place. Turn the base over.
4 Using a 3/16” drill bit, enlarge the four mounting screw holes (Figure
2) in each corner of the base.
5
Select a mounting space at least as large as the voice terminal.
6 Using the base as a template, mark the four mounting screw loca-
tions on the wall.
7 Using a 5/16” drill bit, drill a hole at each of the four marked mounting
screw locations on the wall.
8 Unpack the hardware kit, which was ordered separately from the
voice terminal. Select the proper sized toggle bolts for the thickness
of your walls:
For walls 3/8” to 1/2” thick, use the smaller of the two sizes of
toggle bolts.
●
●
●
For walls 5/8” to 3/4” thick, use the larger of the two sizes.
For solid walls, use either of the two sizes.
9 Insert one toggle bolt into each of the four drilled holes (Figure 8A).
Tap each toggle bolt with a hammer until it is flush with the wall (Fig-
ure 8B).
iss 5, cib2853-7