LuCell LU-1000, Руководство пользователя

Страница: 8 / 12

User Manual 8
Note : The lock memory can save up to 10 fingerprints, and the LCD display
will show 'FULL' when the number of fingerprints excesses.
1. Enter the current password and open the safe.
·You can register the fingerprint only with the door open.
2. Before continuing, find the red password change button inside the safe
on the left side.
·See page 2 for a diagram showing the location of the passwrod
change button
3. Press and hold the red password change button for 5 seconds.
·When the LCD display show '1 FIngEr' and 'COdE' messages on the screen,
enter your current password.
(If the password is correct, you will see '-PASS-' on the screen.
4. Place your fingerprint to the fingerprint sensor when the LCD display
show '1tOUCH'.
·When the display show 'OFF', take off your finger from the sensor.
·Place your fingerprint in the middle of the sensor and closely
press your fingerprint down.
5. When the LCD display shows '2tOUCH', place your fingerprint once
again to the sensor.
6. The fingerprint has been entered successfully if you see 'REC 01'
on the LCD display.
·The number after the 'REC' indicates how many fingerprints
stored in the memory.
How to register a
fingerprint