Installation Instructions
2
|
P a g e
v 1 . 0 ( 0 8 / 2 0 1 7 )
Installation Directions
Remove all packaging material from the product and be careful not to throw away accessories that may be hidden within
the packaging material.
Install the fitting
1.
Cut the installation holes into the deck:
62mm
2.
Install the LED light kits into the installation holes.
3.
Join 4 lights in the kit together and secure by tightening the ring.
4.
Install the LED light kit into the extension cable (E) and secure by tightening the ring (F).
5.
Connect the extension cable to the IR RGB controller (C) secure by tightening the ring (D).
6.
Join IR RGB controller (C) and power adaptor (A) together and secure by tightening the ring (B).
7.
Insert the plug (A) into mains power socket outlet (not included) and ensure it is fully plugged in.
8.
Turn power on at the mains power socket outlet to turn the lamp on/off.
Use the Fitting by remote
Use the remote to control the colour changing mode as following:
"ON"
button – press to turn the lights on.
"OFF"
button - press to turn the lights off.
“
”
button - press to reduce brightness levels.
“
”
button - press to increase brightness levels.
Function mode
button
- Show as figure mode 1 to mode 20. (See details on functional
mode list.)
